Narrow Slaghog® (Min Slat Spacing 1.25")

TECHNICAL SPECIFICATIONS

• - Power: 10 Amp 120V single phase
• - Weight: 44 pounds
• - Overall Length: 87”
• - Slat Thickness (Narrow Slat): 11 gauge (.12”)

Current Manuals

67182 – Narrow Slaghog® SH3 120V/230V – User Manual

SLAG REMOVAL TOOL FOR USE ON LASER CUTTING MACHINES

Slag Removal Tool for use on laser cutting machines

The tool is moved along the slats on the bed of a laser machine to remove slag that accumulates while cutting. Rotary cutting tools ride on each side of the slat to lift and remove the slag. It may be used on steel, copper or hybrid steel/copper slats. When not in use it may be rolled along the floor and stored in the upright position.

The Slaghog™ ships in two pieces; power unit and the handle assembly. All fasteners are metric.

• - Remove the acorn nuts and button head socket screw from the 1.36” diameter stub on the power unit
• - Slide the handle on the stub with the power out cord of the handle on the same side as the plug in on the power unit.
• - Plug the power cord into the power unit
• - Do not plug into power before verifying the switches on the handle and power unit are off: rocker switches to O.

• - Before plugging into power verify that the two switches are turned off
• - Wear work gloves and safety glasses when operating
• - Use extreme care near the cutters.
• - Do not touch cutters unless the tool is unplugged.