All
Rhino Hammer™ - SKU: 66130
$299.00
The Rhino Hammer™ makes removing tabbed parts much easier after they are cut. It uses shop air to create impact vibration that breaks the...
View full product details
Slat Shield Plus - SKU: 66107
$108.00
Slat Shield Plus comes in a 5 gallon container. It is a slag/dross preventative that can be applied to new or cleaned slats. Slat...
View full product details
Magnet Multi Tool MMT - SKU: 66124
$230.00
Handy tool for removing parts after cutting. Technical Specifications 36" reach 32 lb max pull ultra-high temperature magnet Lever to release parts from magnet Remove...
View full product details
Slag Removal Tool - SKU: 66101
$95.00
One end of this tool has a slot for prying slag from slats. The other end can adjust the material position in the laser machine...
View full product details
Magnetic Parts Picker - SKU: 67174
$80.50
Light weight and picks up small light weight parts easily. Uses Pick parts out of a tumbler Pick up loose parts from a nest Technical...
View full product details
Hand Magnetic Lifter - SKU: 66108
$449.00
Magnetic lifter easily lifts steel parts and pipes from the machine after cutting or welding. Weighs Less Than 4 Lbs., safely holds up to 110 lbs...
View full product details
Swivel Magnetic Lifter - SKU: 66134
$525.00
Magnetic lifter easily lifts steel parts from the machine after cutting. Weighs less than 4 lbs and lifts up to 220 lbs. Technical Specifications Over 660...
View full product details
Replacement Cleaning Tool - SKU: 66129 SET
$325.00
After-market cutting tools are a direct replacement for the OEM version. Made from heat treated tool steel for maintaining a better cutting edge and longer...
View full product details
Slaghog® Standard Slat Replacement Cutters
$275.00
Replacement Cutters with fasteners for Slaghog®. Cutter set of 2
View full product details
Slaghog® Narrow Slat Replacement Cutters - SKU: 66145 SET
$275.00
Replacement Cutters for 11 ga slats Cutter set of 2
View full product details
Rhino Hammer™ Tips
$35.00
Tips for the Rhino Hammer™ $35.00 each Quantity discounts available with purchase of 5 or more at a time. To get discount you must click...
View full product details
Rhino Hammer™ Wrench for Small Tip - SKU: 67050
$8.50
Wrench for Small Tip
View full product details
SH1 7A Breaker - SKU: 66123
$10.50
7A Circuit Breaker - For use on 66100 SH1
View full product details
SH2 7A Breaker - SKU: 67064
$35.04
On/Off Breaker Switch 7A - For use on 67054 SH2
View full product details
SH1 & SH2 Motor Brushes - SKU: 66125 SET
$14.00
Brush Set for Slag Hog motor SH1 & SH2 (2016 - Early 2021)
View full product details
3 inches, 15 lbs, 425 degrees - SKU: 66109-3S
$46.75
Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...
View full product details
4 inches, 25 lbs, 210 degrees - SKU: 66109-4B
$43.25
Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...
View full product details
4 inches, 25 lbs, 425 degrees - SKU: 66109-4S
$52.75
Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...
View full product details
3 inches, 15 lbs, 210 degrees - SKU: 66109-3B
$40.25
Lift and remove finished parts from nest. Technical Specifications Easy to lift all flat surface parts Available cup materials for moderate and high temperatures Cup...
View full product details
55 Gallon Drum Slat Shield Plus
$1,114.00
Slat Shield Plus is a slag/dross preventative that can be applied to new or cleaned slats. Slat Shield can be applied to copper as...
View full product details
3.25" Suction Cup Lifter with 12" Handle, 5 lbs, 210 degrees - SKU: 67079-12
$46.50
Lift and remove finished parts from nest. Technical Specifications 12″ length; 3.25″ width, 1.60″ height where rubber vacuum suction cup is located Strong steel body...
View full product details
3.25" Suction Cup Lifter with 18" Handle, 5 lbs, 210 degrees - SKU: 67079-18
$56.25
Lift and remove finished parts from nest. Technical Specifications 18″ length; 3.25″ width, 1.60″ height where rubber vacuum suction cup is located Strong steel body...
View full product details
3.25" Suction Cup Lifter with 36" Handle, 2 lbs, 210 degrees - SKU: 67079-36
$91.25
Lift and remove finished parts from nest. Technical Specifications 36" length; 3.25″ width. Soft black rubber vacuum suction cup. Strong steel body press fit into...
View full product details
SH3 Motor Brushes - SKU: 67179 SET
$22.32
Brush Set for Slag Hog New SH3 Motor (2021)
View full product details
SH2 & SH3 15A On/Off Breaker Switch - SKU: 67063
$27.25
On/Off Breaker Switch 15A - For use on 67054 - SH2 & 67123 - SH3
View full product details
Slat Shield Plus Applicator - SKU: 67219
$100.00
The easy most efficient method to apply Slat Shield plus to your slats. Eliminate pumping and carrying cumbersome garden sprayers. Technical Specifications Uses shop air...
View full product details
Slat Shield Plus 5 Gallon Pail Transfer Pump - SKU: 67235
$249.00
Easily transfer Slat Shield Plus from the pail to any applicator. Technical Specifications Electric pump with adjustable flow up to 4.5 gpm 110VAC operating voltage...
View full product details
Slat Shield Plus 55 Gallon Drum Transfer Pump - SKU: 67236
$395.00
Easily transfer Slat Shield Plus from the drum to any container. Technical Specifications Electric pump with adjustable flow up to 7 gpm 110VAC operating voltage...
View full product details
Standard Slaghog® for Lasers up to 12kW (Min Slat Spacing 1.75")
$6,450.00
Quickly and easily remove tough slag and dross buildup from your laser support surface. The Slaghog® works on Copper as well as Steel support slats and can...
View full product details
Slaghog® HD for Lasers Over 12kW (Min Slat Spacing 1.75")
$6,950.00
Increased torque motor quickly removes tougher slag and dross buildup from the slats on higher powered laser machines. The Slaghog® works on Copper as well as...
View full product details
Narrow Slaghog® (Min Slat Spacing 1.25")
$6,450.00
Quickly and easily remove tough slag and dross buildup from your laser support surface. The Slaghog® works on Copper as well as Steel support slats and can...
View full product details
Slaghog® for Plasma
$7,950.00
Introducing the new SLAGHOG™ for PLASMA (SHP) for difficult to remove slag on plasma and oxyfuel slats. The SHP cleans each slat on both sides...
View full product details
SH3 10A Handle End Breaker Switch - SKU: 67170
$27.25
On/Off Breaker Switch 10A - For use on 67123 - SH3 / SH3-HD
View full product details